Skip to Content
Dan k
Metal Die Cut
Explorations Dan Chen / August 9, 2015

You will need

CNC  (I used a Desktop ShopBot)
Hydraulic Press – 2000 to 3000 PSI with rubber padding
3″x3″ Acrylic Sheet. 0.25″ thick
3M Double Sided Tape
3″x3″ copper 18 to 16 gage sheet
3″x3″  Brass 18 to 16 gage sheet
Hot Glue
0.5″ to 0.75″ Plywood (for making the square jig)
Textured Paper or laser cut pattens: To give the metal some textures (Optional)


DSC05770 DSC05769 DSC05767

DSC05765 DSC05992 DSC05991 DSC05989 DSC05987 DSC05985 DSC05983 DSC05982 DSC05981 DSC05980 DSC05979 DSC05978 DSC05977 DSC05976 DSC05784 DSC05777 DSC05776 DSC05773

IMG_9077 IMG_9078 IMG_9082 IMG_9084 IMG_9087 IMG_9088 IMG_9092 IMG_9095 IMG_9096 IMG_9103 IMG_9105 IMG_9107 IMG_9109 Screen Shot 2015-08-09 at 4.44.28 PM

DSC07042 DSC07037 DSC07036 DSC07035 DSC07034

DAN K CHEN © 2024